LUN configuration manager xp question?

[rainman du]

There are the SCSI path list:
*****************************
port SCSI ID CU:LDEV ......
1A F 0:00
*****************************
why the SCSI ID is F?
Can I config it another SCSI ID?
Thanks

[Hanniff Tingling]

Here is a link with some manuals on the autoRAID 12c that will help.

Provide a feedback if you need anymore help.


http://www.hp.com/cposupport/manindex/hpsurestor19162_eng_man.html

[Hanniff Tingling]

rainman

you need to submit more information; SCSI-ID are generally SET on the hardware side; and usually are changed by DIP switches or the HDD or on the controller or depends on the BUS topology etc.

Provide mode infomation;

[Enes Dizdarevic]

This is from CommandView XP Users Guide (Chapter 7 LUN Configuration Manager):

SCSI ID:
If the SCSI radio button is selected, displays all of the allowed values for SCSI IDs.
If Fibre is selected, the SCSI ID box displays only one (F) SCSI ID.

This manual can be found at http://www.hp.com/cposupport/manindex/hpsurestor64859_eng_man.html

[Tom Moore]

Rainman,

The SCSI ID is always set to 15 on Fibre Channel connections. The LUN ranges go from 0x00 to 0xff per port.

This your original post decodes appropriately:

*****************************
port SCSI ID CU:LDEV ......
1A F 0:00


Port = 1A
SCSI ID = 15 (normal for FC attach)
CU:LDEV - Volume 0:00

I notice there's no LUN number reported. Has it been assigned yet?

Cheers,
Tom

[Insu Kim]

Tom is right!
In the case of Fiber Channel, Only SCSI ID "F" will be used so only SCSI ID "F" is displayed in the LUN configuration menu.

Hope this helps,