Model 12H Problem

[Ernie De Guzman]

Bill,

Thanks a lot. I did send the Logprint to HP and they found a lot of resets and lbolts, and pointing to just about everywhere. They went with changing the backplane, the 2 scsi cards that the raid array is connected to, and 1 36GB disk and up to now, we are still error free. Although I will be close watching the system, I'm keeping my fingers crossed. I will update you on what will happen with this.

[Ernie De Guzman]

Hi everyone! The HP CE decided to replace the whole path to the disk array again, that includes the array controllers, cables, terminators, HBA cards and the I/O backplane on the N4000. They did the change on 7/17 and up to now we've been error free. We're back to having 1Gb free available for LUN's and it is still error free. Thanks to everyone who responded.

[Bill McNAMARA_1]

sounds like that should do it!
I can vaguely recall that HBAs can be prone to errors of a common kind.. I would doubt that _everything_ failed!.. and the solution taken was a little commando!.. you must have been making some noise!

Good luck!
Later,
Bill