HPE Community
Disk Enclosures
1756435 Members
3127 Online
108847 Solutions
New Discussion

Re: Redhat 5.1 ACU Issue

 
ClaudioD'Anduono
Occasional Advisor

‎06-04-2008 01:51 AM

‎06-04-2008 01:51 AM

Redhat 5.1 ACU Issue

Hi there,
I have an issue with ACU in management page; it doesn't work; it works via CLI but it sees only 1 controller

System is a proliant dl380g5 with 2 HBAs EMULEX FC2142SR 4GB PCI-e and an MSA1000.

Customer would like configure array via a GUI and so I have to solve problem.

Thank in advance
0 Kudos
Reply
1 REPLY 1
ClaudioD'Anduono
Occasional Advisor

‎06-04-2008 05:45 AM

‎06-04-2008 05:45 AM

Re: Redhat 5.1 ACU Issue

Ok, I solved the problem.
It was a library that is not installed by default on RH5.1

I post it so that someone else doesn't drive crazy.

libnl-1.0-0.10.pre5.4.i386.rpm

You can find it on installation dvd media or on first cd media.

Bye all

Claudio
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.