HPE Community
Disk Enclosures
1757067 Members
1890 Online
108858 Solutions
New Discussion

Unusual Drive Status in CIM

 
ashfaq hussain
New Member

‎10-25-2002 06:31 AM

‎10-25-2002 06:31 AM

Unusual Drive Status in CIM

We have an external array running 6 x 18 Gb ULTRA 2's. When a degraded drive was replaced with a new one, the status in CIM went from Status: OK, Action: Replace Drive to, Status: Failed, Action: Replace drive, TO Staus: OK, Action: No action required. It had changed to failed 20 mins into the rebuild cycle of the drive. Then changed back to OK. This server is on completely new hardware, is it possible that the CIM agents are corrupt?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.