Brocade 4/24 C-Class Blade enclosure FW update Failed

[Danel_1]

Hi ,

I want to update a Brocade switch embedded in CClas enclosure to the 5.3.0a FW , ans i receive this error message :

Firmware download failed :
The requested firmware does not support this switch.

th upgrade from 5.0.5 to 5.2.0b run correctly.

Thank for any help

Didier DANEL
HP Frnace

[Mike Reznak]

Hi,

have you followed the steps in Firmware upgrade instructions ?

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=3185340&swItem=co-53783-1&prodNameId=3185345&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=1#d0e597

Mike

[Danel_1]

Hello Mike,

Not Completely , i am not sure for the based routing policy .
this is set to the default value , the configuration is new.
I check this as soon as possible , but i think that the error message will be different.

Thank for your help

Didier