Creating boot disk

[Kurt_9]

If I create a bootdisk by doing a "format a: /s" will that bootdisk enable the CD-Rom or not?

Thanks

[Jamie Hughes]

Hello Kurt,

No, a DOS format /s will only put the DOS boot files on the floppy. If you need to specify any drivers, you would need to specify the drivers in the autoexec.bat/config.sys and also put the driver itself on the floppy.

Best regards,
Jamie Hughes

[Kurt_9]

Can you tell me the steps to specify the drivers in the autoexec.bat/config.sys and put the driver on the floppy.

Thanks

[Jamie Hughes]

Hi Kurt,

There are several steps involved so here is a great Microsoft article that should help you out.

http://support.microsoft.com/support/kb/articles/Q135/1/74.ASP

The article was written for a different issue but it has a good explanation of how to get the cdrom driver setup.

Best regards,
Jamie Hughes