General
cancel
Showing results for 
Search instead for 
Did you mean: 

Data Parity Error Detected during address or write data phase

Jitendra Agrawal
Occasional Contributor

Data Parity Error Detected during address or write data phase

We have intalled RedHat Linux 7.3 on ML 350 machine. It gives error messages while booting. Disk read/writes are extremely slow.

What do these errors mean?

Uhhuh. NMI received. Dazed and confused, but trying to continue
You probably have a hardware problem with your RAM chips

and
scsi0: PCI error Interrupt at seqaddr = 0x44
scsi0: Data Parity Error Detected during address or write data phase
scsi1: PCI error Interrupt at seqaddr = 0x44
scsi1: Data Parity Error Detected during address or write data phase
HP CISS Driver (v 2.4.48-12)
2 REPLIES
Steven E. Protter
Exalted Contributor

Re: Data Parity Error Detected during address or write data phase

I think you have a disk on the edge. I'd get a backup of data and then check the hardware. It might also be generatted by damaged cabling or a flakey SCSI card.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Kodjo Agbenu
Honored Contributor

Re: Data Parity Error Detected during address or write data phase

Hello,

Did you use HP drivers to install RH7.3 ? If no, I guess cciss driver is the pb.

Go to :
http://h18004.www1.hp.com/support/files/server/us/locate/86_2588.html

=> Software - Driver Diskettes
=> Driver Diskette image for...Smart Array 5i...

Follow the procedure to create the image disk. Boot your install CD, and at the first prompt type "linux dd"

Good luck.

Kodjo
Learn and explain...