HPE Community
Operating System - HP-UX
1756510 Members
3089 Online
108848 Solutions
New Discussion юеВ

Re: Enable to fnd my 2nd disk

 
kouadio
Occasional Advisor

тАО04-21-2010 04:45 AM

тАО04-21-2010 04:45 AM

Enable to fnd my 2nd disk

Hi expert,
I just install an rx2666├а server with 2x146 internal disks.
Now I type ioscan -kfnC disk to display my disk before mirroring vg00.
The problem is that the system display only one disk (vg00) and cdrom.
The second disk is not display.
Please help to solve this problem.
Thanks.
0 Kudos
Reply
3 REPLIES 3
Michal Kapalka (mikap)
Honored Contributor

тАО04-21-2010 04:47 AM

тАО04-21-2010 04:47 AM

Re: Enable to fnd my 2nd disk

hi,

if yu are use HW raid the OS will see only one disk logical disk from RAID.

mikap
0 Kudos
Reply
James R. Ferguson
Acclaimed Contributor

тАО04-21-2010 04:50 AM

тАО04-21-2010 04:50 AM

Re: Enable to fnd my 2nd disk

Hi:

You no doubt have a smart array controller and your two internal disks hardware mirrored. To confirm, try:

# sasmgr get_info -D /dev/sasd1 -q raid

Regards!

...JRF...
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО04-21-2010 04:53 AM

тАО04-21-2010 04:53 AM

Re: Enable to fnd my 2nd disk

Please send

# ioscan -fn

from your rx2660.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.