ia64_corehw

[wangshan_1]

Hi all,
On hpux 11.20 based on Itanium, see a process named "ia64_corehw", what does this process work for?

thanks!

- WangShan

[Bill McNAMARA_1 · Accepted solution]

It's a part of the Event Monitoring Subsystem:

/usr/sbin/stm/uut/bin/tools/monitor/ia64_corehw

http://wojo.rose.hp.com/hpux/onlinedocs/diag/ems/emd_ia64core.htm

Later,
Bill

[Corthouts Carlo]

Hello,

This is an EMS hardware monitor for ia64.
It provides information about the hardware for
STM.

[Alex Glennie]

Its an EMS Hardware Monitor process as in

For the September 2001 release of HP-UX 11i V1.5, the following monitors are scheduled to be available:
AutoRAID Disk Array (armmon)
CMC Monitor (cmc_em).
Core Hardware for Itanium (ia64_corehw) <------
Disk (disk_em)
Disk Array FC60 (fc60mon)
Fibre Channel Adapter Model A5158 (dm_TL_adapter)
Fibre Channel Arbitrated Loop Hub (dm_fc_hub)
Fibre Channel SCSI Multiplexer (dm_fc_scsi_mux)
Fibre Channel Switch (dm_fc_sw)
High Availability Disk Array (ha_disk_array)
High Availability Storage System (dm_ses_enclosure)
Memory (dm_memory_azusa) for RX9610 only (not for RX4610)
Peripheral Status Monitor (psm)
Remote Monitor (RemoteMonitor)
SCSI Disk Monitor (scsi_disk)
SCSI Tape Devices (dm_stape)
System Status (sysstat_em)
UPS (dm_ups)