Booting problem in HP-UX 9000/800/L3000-7x Server

[gab_in]

Hi,

One of our HP-UX Server is not booting. Please find below the LED Combinations and system details and let me know what could be the possible causes or Can we boot the server without replacing the disk ?

1: LED Combination :

RUN----GREEN BLINKING
ATTENTION ---ORANGE
FAULT---RED
POWER--GREEN

2: System Information:


Model: 9000/800/L3000-7x
Main Memory: 12288 MB
Processors: 3
OS mode: 64 bit
OS Version: HP-UX version B.11.11.


3:

Disk layout:

LVM disk Device file HW Addr size vol. grp
HP 36.4GST336753LC /dev/dsk/c1t2d0 0/0/1/1.2.0 34732 /dev/vg00
HP 36.4GST336753LC /dev/dsk/c2t0d0 0/0/2/0.0.0 34732 /dev/vg01
HP 36.4GST336753LC /dev/dsk/c2t2d0 0/0/2/0.2.0 34732 /dev/vg02
HP 73.4GST373453LC /dev/dsk/c1t0d0 0/0/1/1.0.0 70007 /dev/vg03


Thanks in advance.

[Robert Salter]

Not enough information. The red FAULT is obviously an indicator that there's a problem. Can you access the GSP and then look at the VFP?

[Torsten.]

I agree, the red fault light is caused by a higher level failure event - review the GSP log or contact your HP support to get this solved.

[Roberto Arias]

Hardware problem, sure.


In what step are you stopped?check GSP log