HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Getting hung when going into GSP. Getting the following when logged into the GSP. Is his related.

 
John Goetz
Advisor

Getting hung when going into GSP. Getting the following when logged into the GSP. Is his related.

Guardian Service Processor WARNING: GSP is permanently flow controlled very likely by the local serial port. You need to remove the flow control condition.
4 REPLIES 4
uk1
Frequent Advisor

Re: Getting hung when going into GSP. Getting the following when logged into the GSP. Is his related.

Have you tried connecting directly to the serial port and check sa settings under command mode. I am unfamilier with that error but under sa you can turn telnet on/off
Pedro Cirne
Esteemed Contributor

Re: Getting hung when going into GSP. Getting the following when logged into the GSP. Is his related.

Hi,

Are you trying to acesse GSP via LAN or via serial connection?

Pedro
John Goetz
Advisor

Re: Getting hung when going into GSP. Getting the following when logged into the GSP. Is his related.

via LAN
Pedro Cirne
Esteemed Contributor

Re: Getting hung when going into GSP. Getting the following when logged into the GSP. Is his related.

Hi,

Check if you don't have something connected to the serial port and try to reset the GSP:

#stty +resetGSP < /dev/GSPdiag1

Enjoy :)

Pedro