HP9000 K210 support on HP-UX 11i

[Kenrick Sy]

Hi,

Is HP-UX 11i supported on HP9000 K210?

Thanks.

Kenrick

[Adisuria Wangsadinata_1]

Hi Kenrick,

Looks like HP9000/K210 is not supported for HP-UX 11i, based on the information below :

http://www.docs.hp.com/en/5991-0662/ch02s03.html

1. http://www.docs.hp.com
2. Core HP-UX > 11iv1
3. Installation and Updating
4. HP-UX 11i Version 1 Installation and Update Guide, December 2004 > HTML
5. System Requirements
6. Supported Servers and Workstations

Hope this information can help you.

Cheers,
AW

[Adisuria Wangsadinata_1]

Hi Kenrick,

The previous document that I sent to you is Dec 2004 revision and it didnt say about HP9000/K210 on the list of supported systems.

BUT at June 2004, HP900/K210 on the list of supported systems (even only for 32 bits). Check the url below :

http://www.docs.hp.com/en/5990-7279/ch03s01.html

The best way, is try to install HP-UX 11i v1 to your HP9000/K210.

Good luck,
AW

[Robert-Jan Goossens]

Hi Kenrick,

11i 32 bits version is supported on the K210.

http://www.testdrive.hp.com/STKT/serversupport.html

Best regards,
Robert-Jan

[Mahesh Kumar Malik]

Hi

HP-UX 11i can be installed on 9000/K210. It will work in 32 bit simulation mode.

Regards
Mahesh