HPE 9000 and HPE e3000 Servers
1754249 Members
3268 Online
108812 Solutions
New Discussion юеВ

Loading 10.20 on an A500 server

 
SOLVED
Go to solution
David Trevino
New Member

Loading 10.20 on an A500 server

Although I realize that it is probably unsupported, has anyone had any experience installing HP-UX 10.20 on an A500 server?

When booting from the 10.20 media, I get the following messages:

Booting...
Boot IO Dependent Code (IODC) revision 1
Hard Booted.
ISL Revision A.00.38 Oct 26, 1994
ISL booting hpux (;0):INSTALL

After a short while the system returns an ISL> prompt.

Any information would be appreciated.

Thanks,
David
8 REPLIES 8
Patrick Wessel
Honored Contributor

Re: Loading 10.20 on an A500 server

David,
You proofed the theory that it does not work!
You are not able to run hp-ux 10.20 on an A400/500.
There is no good troubleshooting with bad data
Vincent Farrugia
Honored Contributor

Re: Loading 10.20 on an A500 server

Hello,

As far as I know, there should be no problems installing HP/UX 10.20 on an A500 server.

When you boot from the 10.20 CD, you are asked whether you want to interact with the installation. Enter no, and you would not be presented with the ISL> prompt. The installation continues automatically.

Just my 2c worth.

HTH,
Vince
Tape Drives RULE!!!
Olaf Tomaszewski
Frequent Advisor
Solution

Re: Loading 10.20 on an A500 server

Hi,

As i know, if you have PA8500 processor you can use 10.20 but if you have PA8600 you must have 11.00 . Check your processor(s) type ...
Patrick Wessel
Honored Contributor

Re: Loading 10.20 on an A500 server

Just two reasons why the A400/500 does NOT support hp-ux 10.20:
The PDC of an A400/500 supports only 64 bit hp-ux
hp-ux 10.20 supports no memory holes like in the A400/A500 address map
There is no good troubleshooting with bad data
Sanjay_6
Honored Contributor
Michael Tully
Honored Contributor

Re: Loading 10.20 on an A500 server

The only supported A class server that will run 10.20 is an A180.

Mt 3 cents worth!
-Michael
Anyone for a Mutiny ?
Vincent Farrugia
Honored Contributor

Re: Loading 10.20 on an A500 server

Hi,

Looks like I made a mistake... well I learnt something new today :-)

Please give points to the rest of the people who answered.
Tape Drives RULE!!!
David Trevino
New Member

Re: Loading 10.20 on an A500 server

A5xx only supports 64-bit HP-UX. 10.20 is 32-bit.