MP battery replacement

[aruns_s]

Hi,

Our hardware engineer had replaced Core MP battery on rp7420.After replacing the battery, he is getting a messae that 'mp not initialized' if he runs some commands,like MP:CM>id.

Please advice

[Robert-Jan Goossens]

Hi,

http://docs.hp.com/en/AD117-9003A/ch04s06.html

Search inside the doc for the word battery.

Regards,
Robert-Jan

[Torsten.]

Hi,

the procedure is very close to this:
http://docs.hp.com/en/A7025-96018/ch06s14.html


If it looks like the following example, you need to set the LAN values (hostname for the MP):


Welcome to the

rp7420 Management Processor

(c) Copyright 1995-2004 Hewlett-Packard Co., All Rights Reserved.

Version A.7.008



MP MAIN MENU:

CO: Consoles
VFP: Virtual Front Panel (partition status)
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
HE: Help
X: Exit Connection

[uninitialized] MP> cm