HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

PA_RISC support

 
SOLVED
Go to solution
Daryl Klein
Occasional Contributor

PA_RISC support

What is HP's position on supporting PA_RISC based systems in the future?
3 REPLIES 3
Patrick Wallek
Honored Contributor
Solution

Re: PA_RISC support

As far as I know, the last PA-RISC chip has been released already. I believe PA-RISC systems will be supported for another 5-7 years or so.
Torsten.
Acclaimed Contributor

Re: PA_RISC support

How to answer such question from my own point of view?

Currently sold system are supported at least until end of 2013:

http://www.hp.com/products1/unix/operating/public_hp-ux_systems_support.pdf

The current OS releases 11.11 and 11.23 (aka 11i v1 and 11i v2) too:

http://www.hp.com/softwarereleases/releases-media2/history/slide2.html

This may change and increase with 11.31.


HPs statement looks like this:

http://www.hp.com/products1/servers/direction.html

In case of questions ask your HP contact!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Daryl Klein
Occasional Contributor

Re: PA_RISC support

Thank you for the replies and information.