HPE Community
HPE 9000 and HPE e3000 Servers
1754136 Members
2387 Online
108811 Solutions
New Discussion

V2600 and Teststation

 
Emil Henry
Regular Advisor

‎10-20-2004 09:14 AM

‎10-20-2004 09:14 AM

V2600 and Teststation

Hello!

Am in the process of setting up a V2600 and the teststation. I am not seeing any signs that the teststation is seeing the V-Class. I have connected all three cables (RS-232, AUI Core and AUI Test) to the V-Class, and also the 2 cables to the test station. All 3 transceivers are lit green.

Please advice on how I should proceed.

Thanks in advance.

Emil
0 Kudos
1 REPLY 1
Emil Henry
Regular Advisor

‎10-20-2004 11:28 AM

‎10-20-2004 11:28 AM

Re: V2600 and Teststation

Hello!

Just an update. I connected a teststation (a 712) that we had from a V2200 (also donated) and that works fine. So, the B180L teststation could be just a regular workstation that has the teststation software installed. I see an additional LAN card in the 712, which I don't see on the B180L. Please advice.

Regards,

Emil
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.