HPE 9000 and HPE e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

npar problem

 
SOLVED
Go to solution
pedliz12
Advisor

npar problem

tried to parmodify the curent partition

and got this error: parmodufy -p0 -d1 -B
sh: parmodufy: not found.
# parmodify -p0 -d1 -B
Internal Error: Exception caught for modify.
No changes can be made because the profile is already in the process of being changed.[]"
Error: Unable to update the Stable Complex Configuration Data.
any ideas
3 REPLIES 3
Avinash Agarkar
Valued Contributor

Re: npar problem

Hi,

Please follow this -

create the new partation with name test

parmodify -p 0 -P test

Thanks,
Avinash
Great Power Comes With Great Responsibility
Torsten.
Acclaimed Contributor
Solution

Re: npar problem

I think you have pending changes already.

Read the "Unlocking Complex Profile Entries" chapter in the nPartition Administrator's Guide.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
pedliz12
Advisor

Re: npar problem

pending chanes were still there so i didi a shutdown -R and the cells were open for reconfiguration... Thank you