HPE EVA Storage

EVA 6000 Controler unable to boot

 

EVA 6000 Controler unable to boot

Hello All
I have an EVA6000 with a controller unable to boot , when starting loading the image to the controller during startup , i got this message on the controller OCP

TE:2.020205dc

any advice
Ayman
8 REPLIES 8
Alzhy
Honored Contributor

Re: EVA 6000 Controler unable to boot

Call HP Support.
Hakuna Matata.

Re: EVA 6000 Controler unable to boot

thank you for your easy response
but my EVA is out of HP support ...

I need a help in order not to replace the controller but part of it

Please advice
Johan Guldmyr
Honored Contributor

Re: EVA 6000 Controler unable to boot

I don't think the description of the TE's are available publicly on hp.com.

Or what that termination code means.

It's also possible to do a trade call with HP and pay for the help on a one-time basis.

Did you change anything recently?
Any error leds lit at all?
Alzhy
Honored Contributor

Re: EVA 6000 Controler unable to boot

Pay H-Pay or expand your CRY for help.. who knows there may be an HP Tech or an ex-HP Tech willing to give you clues.
Hakuna Matata.
Johan Guldmyr
Honored Contributor

Re: EVA 6000 Controler unable to boot

Yeup, you never know :)

Re: EVA 6000 Controler unable to boot

Nothing Change last 3 years

Anthony Martin_1
Frequent Advisor

Re: EVA 6000 Controler unable to boot

Good afternoon Ayman,
Please provide the XCS version you are using.
We might be able to work out the fault with the information.

Regards
Anthony

Re: EVA 6000 Controler unable to boot

Hi All
the firmware revision is 5.030 , it is too old !!!

Best Regards
Ayman Jweinat