HPE EVA Storage
1755854 Members
3246 Online
108838 Solutions
New Discussion юеВ

Re: Upgrade EVA8000 controller Firmware

 
shafeygad
Advisor

Upgrade EVA8000 controller Firmware

Dear All

How to upgrade my
1-Controller firmware HSV210
2-Command Viewer


My status now :
1-My firmware 6110V
2-Command viewer 6.0.0.193V
3-Harddisk Firmware HP03
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Upgrade EVA8000 controller Firmware

Firmware 6220 and commandview 9.2 is available from software.hp.com. Disk FW is here

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3351789&prodTypeId=329290&prodSeriesId=3302267&swLang=13&taskId=135&swEnvOID=54

Get the instructions from hp.com/go/bsc and read them carefully.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Upgrade EVA8000 controller Firmware

And of course you need to get new command view licenses from HP.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Marcus Schack
Trusted Contributor

Re: Upgrade EVA8000 controller Firmware

Normally when we go through this process we do the following:

1) Update/Upgrade
- HBA firmware/drivers
- Disk drive firmware
- Command View, make sure you have licenses
- EVA firmware

The procedures are at the site listed in previous message.