HPE EVA Storage

Upgrading Command View 9.1 to 10.1 for array-based management

 
dmitry86
Occasional Contributor

Upgrading Command View 9.1 to 10.1 for array-based management

Hi All,

 

Is there a path to upgrade CV version 9.1 to the latest one without having support contract? I believe there is no way to get a software, right?

 

We're running EVA4400 w/Embedded Switch, XCS 09534000 

 

Any advice highly appreciated!

 

Cheers,

Dmitry

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Upgrading Command View 9.1 to 10.1 for array-based management

http://software.hp.com has all the bits. Search for P6000 command view, version 10.2 is the latest. The bundle contains CV for server and for the ABM module. Latest firmware is 11001100, also on this page.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
dmitry86
Occasional Contributor

Re: Upgrading Command View 9.1 to 10.1 for array-based management

Thanks a lot Torsten, could you please give a hint what to do with FC embedded switches? Do they also need to be upraded afterwards?

 

Cheers,Dmitry