VA7110 Not Enough Drives >

[Sansam]

Hi Team,

I am new to HP VA7110 storage. I have one HP VA7110 Array which was not in use for last 1 year. Now we want to make it for some development purpose.

Now, the problem is we have 7 disks in array and we are not able to create the luns even format the array. its showing not enough disks even its having 7 disks and in ready state.

Not Enough Drives > dsp -d

DISK AT M/D1:
Drive State: Included
Vendor ID: HP 36.4G
Product ID: ST336752FC
Product Revision: HP07
Capacity: 33792 MB
Loop Address: 111
Node WWN: 0x20000004cfb13790
Initialization State: Ready
Volume Set Serial No: 000017350000003D
Block Size: 520
Serial Number: 3ET0QH3Z

DISK AT M/D2:
Drive State: Included
Vendor ID: HP 36.4G
Product ID: ST336752FC
Product Revision: HP07
Capacity: 33792 MB
Loop Address: 112
Node WWN: 0x20000004cfb104c1
Initialization State: Ready
Volume Set Serial No: 000017350000003D
Block Size: 520
Serial Number: 3ET0NHEQ
Recovery Maps are on this disk.

DISK AT M/D3:
Drive State: Included
Vendor ID: HP 36.4G
Product ID: ST336752FC
Product Revision: HP07
Capacity: 33792 MB
Loop Address: 113
Node WWN: 0x20000004cfb104f2
Initialization State: Ready
Volume Set Serial No: 000017350000003D
Block Size: 520
Serial Number: 3ET0QV94

DISK AT M/D4:
Drive State: Included
Vendor ID: HP 36.4G
Product ID: ST336752FC
Product Revision: HP07
Capacity: 33792 MB
Loop Address: 114
Node WWN: 0x20000004cfb104c3
Initialization State: Ready
Volume Set Serial No: 000017350000003D
Block Size: 520
Serial Number: 3ET0QHC1

DISK AT M/D6:
Drive State: Included
Vendor ID: HP 36.4G
Product ID: ST336752FC
Product Revision: HP07
Capacity: 33792 MB
Loop Address: 116
Node WWN: 0x20000004cfb13f45
Initialization State: Ready
Volume Set Serial No: 000017350000003D
Block Size: 520
Serial Number: 3ET0RBFX

DISK AT M/D7:
Drive State: Included
Vendor ID: HP 36.4G
Product ID: ST336752FC
Product Revision: HP07
Capacity: 33792 MB
Loop Address: 117
Node WWN: 0x20000004cfb13dad
Initialization State: Ready
Volume Set Serial No: 000017350000003D
Block Size: 520
Serial Number: 3ET0896E

DISK AT M/D9:
Drive State: Included
Vendor ID: HP 36.4G
Product ID: ST336752FC
Product Revision: HP07
Capacity: 33792 MB
Loop Address: 119
Node WWN: 0x20000004cfb13b23
Initialization State: Ready
Volume Set Serial No: 000017350000003D
Block Size: 520
Serial Number: 3ET04XPY
Recovery Maps are on this disk.

Total capacity of physical disks in array = 231 GB


Not Enough Drives > fmt
Format Array. Clear ALL data? (yes/no):yes


Formatting Subsystem...


38370HP22P0610051658: Initializing:
02 04 06 08 0A 0C 0E 12 16 18 1A 1C 1D 1E 20 22 24 26
Not Enough Drives >

Not Enough Drives > dsp -c

Controller 1 Not Present

CONTROLLER AT M/C2
Controller State: Good
Serial Number: 00PR04105941
Vendor ID: HP
Product ID: A6189A
Product Revision: HP22
Host OS: HPUX
Battery Charger FW Revision: 4.3

HOST PORT INFORMATION
Status: Good
Port WWN: 0x50060b000015426e
Link State: Up
Port Data Rate: 1 GB/sec
Topology: Private Loop
Loop ID: 108
-----------------------------------------------------------
Not Enough Drives >

Not Enough Drives > dsp -f

FRU LOCATION HARDWARE COMPONENT IDENTIFICATION STATUS
=========================================================================

M Main Enclosure 00SG145G0037 Not Enough Drives
M/C2 AutoRaid Controller 2 00PR04105941 Good
M/C2.B1 NVRAM Battery 000000029241 Good
M/C2.M1 Memory DIMM Not Applicable Good
M/C2.M2 Memory DIMM Not Applicable Good
M/C2.H1 Host Port 00000000006c Good
M/D1 Disk 1 3ET0QH3Z Included
M/D2 Disk 2 3ET0NHEQ Included
M/D3 Disk 3 3ET0QV94 Included
M/D4 Disk 4 3ET0QHC1 Included
M/D6 Disk 6 3ET0RBFX Included
M/D7 Disk 7 3ET0896E Included
M/D9 Disk 9 3ET04XPY Included

Not Enough Drives >

Please help me to re-configure this array..

Thanks in advance,

[marsh_1]

hi,

do you have autoraid enabled ?

fwiw

[Torsten. · Accepted solution]

I don't think this is a VA7110!

Product ID: A6189A
Product Revision: HP22

This must be a VA7400.

The minimum number of drives is 8 for this array.