Windows 2008 R2 Server cannot see any LUNs on HP P2000 MSA

[nochangeforyou]

Hello,

I am having a very difficult time getting our Windows Server 2008 R2 to see any of the LUNs on the directly attached P2000 G3 1Gbe/iSCSI. 

I have verified the firmware is up to date on the P2000.

I have installed the Windows 2008 MPIO feature. I have run the following commands on the server:

ocsetup multipathio /norestart

mpclaim -n -i -a

mpclaim -r -i -d "HP MSA2" (the gap has 6 spaces)

mpclaim -r -i -d "HP P2" (the gap has 6 spaces)

I have disabled the firewall on W2K8.

I have installed the HP DSM Manager, which I can see there are 2 LUNs listed, but there are no options to configure anything.

When I run mpclaim -e it states there is no enterprise storage connected to the system.

I have called HP support, but they told me I need an installation care pack instead of the 24x7 support pack which I purchased... very frustrating. 

Am I just missing something?

[Torsten.]

Did you create the host entries at the P2000 side and mapped the LUN to that hosts?

[nochangeforyou]

Hello,

Yes, I created the host entries and mapped the LUN. I attached the picture of it to this message.