HPE Community
HPE EVA Storage
1835959 Members
2759 Online
110088 Solutions
New Discussion

command to find out the IP address of MSA1000 storage array

 
Umamaheswara Reddy
Occasional Contributor

‎04-14-2011 04:57 AM

‎04-14-2011 04:57 AM

command to find out the IP address of MSA1000 storage array

Hi,
Could you please let us know how to find out the IP address of the MSA1000 storage array from CLI .Currently I am connected to the storage using serial console cable.
CLI >
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎04-14-2011 05:01 AM

‎04-14-2011 05:01 AM

Re: command to find out the IP address of MSA1000 storage array

The MSA1000 has no network!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Rob Crooks
Frequent Advisor

‎04-25-2011 08:59 AM

‎04-25-2011 08:59 AM

Re: command to find out the IP address of MSA1000 storage array

If you want to add/move/delete volumes on the MSA, use the HP Array Configuration Utility on any server connected to the same SAN. ACU can be downloaded from HP Drivers or installed from the SmartStart CD. The network port on the back of the MSA is only for the SAN card, and not for the actual MSA, unlike the EVA units.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.