HPE EVA Storage

problem in running and connecting to EVA8400 !!!

 
SOLVED
Go to solution
Hadi93
Advisor

problem in running and connecting to EVA8400 !!!

Hello !

 

I have a problem with HSV-450 controller.

 

this message is shown on the OCP of Controllers :

 

(Waiting for user input at console)

 

i tried to connect serial port to controller but they didn’t match !!

 

we used RJ-45 connector , but it seems not to be compatible with this port !!

 

and we can't manage  EVA8400 by Command View  !!!!!!

 

which connector is suitable for this ??

 

what is the best solution ???

 

 

I am looking forward to hearing from you !!!!!

 

 

 we send two image from EVA8400 !!! 

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: problem in running and connecting to EVA8400 !!!

It is the same cable like the MSA1000 / MSA1500 serial cable.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Hadi93
Advisor

Re: problem in running and connecting to EVA8400 !!!

thanks for your help !!!

but why this message is shown on the OCP of Controllers :

 

(Waiting for user input at console)

 

and what we do ???

Torsten.
Acclaimed Contributor
Solution

Re: problem in running and connecting to EVA8400 !!!

see http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN/Hsv200-failure-at-startup/td-p/4982758


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!