1755721 Members
3253 Online
108837 Solutions
New Discussion

IMC - Device Asset Report

 
HornAlum
Occasional Contributor

IMC - Device Asset Report

Running IMC 7.2. I'm looking at the admin guide and it says there should be a "Device Asset Report", but i don't have that report pre-defined, nor do i have many of the other pre-built reports it specifies.

How do I add this or find it?

1 REPLY 1
Pack3tL0ss
Valued Contributor

Re: IMC - Device Asset Report

First just to make sure the template list isn't being filtered.  Make sure the "Type" drop-down is set to "All" or in the case of the Device Asset Report you could set it to "Resource Statistics Report".  You can also just type "asset" in the 'Template Name' search box it should come up in the results.

You can verify the report template is there by looking in <imc installation dir>\client\web\apps\imc\<reports and or reportsv2>\en\iMC-NETASSET

the Device Asset Report Template is netAssetInfo.jasper (if v2) or assetinfo.rpt

There was a change to the reporting engine.  Your IMC is likely all the newer v2 reports (jasper reporting engine), but providing both paths just in case. 

PL