IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to delete an AP

ONVZ
Advisor

Unable to delete an AP

Hi,

 

Running iMC PLAT 7.0 (E0202).

I have changed the subnet of the subnet the APs get an IP-address from.

However in iMC one of the APs is still considered to have its old ip-address

and is of course considered off-line.

I 've tried to delete, remove and rediscover this AP but this fails.

Is there another way to get this done?

 

Thanx Jaap

6 REPLIES
LindsayHill
Honored Contributor

Re: Unable to delete an AP

Are you trying to monitor the APs directly through IMC? or are you using the WSM add-on?

ONVZ
Advisor

Re: Unable to delete an AP

Hi Lindsay,

 

I 'm using the WSM add-on.

 

Greetz Jaap

LindsayHill
Honored Contributor

Re: Unable to delete an AP

OK, so you shouldn't be discovering the APs directly through IMC. You should only need to discover the MSM, and then the APs should show up. When you change things at an MSM level, it should be reflected in the APs displayed in IMC.

Thunder_GAO
Occasional Advisor

Re: Unable to delete an AP

IMC manages Access Controller directly, and AC will forward commands to Fit AP.
ONVZ
Advisor

Re: Unable to delete an AP

Hi Lindsay/Thunder,

You 're right Lindsay, iMC should reflect the information the MSM has. But iMC doesn't update the ip-address info the MSM has for this AP right-now.

Thunder - Because iMC doesn't have the correct ip-address no succesful action can be taken towards this AP.

ONVZ
Advisor

Re: Unable to delete an AP

Hi,

 

The AP after 4 days is now presented with the right ip-adres in iMC.......

No clue why it took so long.

 

Greetz Jaap