Hello.
Customer have ice V2.01 - he capture rhel 5U1
from bl460c & try to deploy this image.
He got his first error on the partition page:
Partitioning error:
===========================
Step 4: Specify Partition Information
Partition Information
com.google.gwt.user.client.rpc.InvocationException: The call failed on the server; see server log for details
----------------------------------------------
(btw - the image i captured from the time i build the ice system - works fine )
more logs:
Log:
===========================
ID: 105540
Task Name: Deploy Linux Image
Tool: Deploy Linux Image
Status: Failed
Start time: 4/26/09 3:51 PM
End time: 4/26/09 4:19 PM
Target name: encux5-b9-mg
Target status: Failed
Start time: 4/26/09 3:51 PM
End time: 4/26/09 4:19 PM
--------------------------------------------------------------------------------
Operation 1: Power Down Server
Status: Complete
Start time: 4/26/09 3:51 PM
End time: 4/26/09 3:51 PM
Log:
Checking to see if power is on.
Attempting to power down via management processor
Completed succesfully
Operation 2: Configure System to Boot from Network
Status: Complete
Start time: 4/26/09 3:51 PM
End time: 4/26/09 3:51 PM
Log:
Configuring system to boot from network.
Booting to 64bit ramdisk.
Booting to 64bit ramdisk.
Booting to 64bit ramdisk.
Booting to 64bit ramdisk.
Completed successfully.
Operation 3: Set System to One Time Network Boot
Status: Complete
Start time: 4/26/09 3:51 PM
End time: 4/26/09 3:51 PM
Log:
Setting one time PXE.
Completed successfully.
Operation 4: Power On Server
Status: Complete
Start time: 4/26/09 3:51 PM
End time: 4/26/09 3:52 PM
Log:
Checking to see if power is on.
Completed succesfully
Operation 5: Wait for RAM Disk Response
Status: Complete
Start time: 4/26/09 3:52 PM
End time: 4/26/09 3:59 PM
Log:
Waiting for RAM disk to respond.
RAM disk booted sucessfully at 10.57.18.132
Operation 6: Deploy Linux Image
Status: Failed
Start time: 4/26/09 3:59 PM
End time: 4/26/09 4:19 PM
Log:
Configuring partition scheme to send to system.
Configuring RAM disk for deployment.
Deployment Commands
Waiting for RAM disk to complete configuration.
Ramdisk did not respond in allotted time
Operation 7: Configure System to Boot from Local Disk
Status: Not Executed
Start time: 4/26/09 4:19 PM
End time: 4/26/09 4:19 PM
Log:
This operation has a status of Not Executed because a previous operation in the chain has a status
of Failed.
Operation 8: Reset Server
Status: Not Executed
Start time: 4/26/09 4:19 PM
End time: 4/26/09 4:19 PM
Log:
This operation has a status of Not Executed because a previous operation in the chain has a status
of Failed.
Any idea what could be the problem ???
regards
Shalom Klemer.
