Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Fan cooler & Integrity rx 1620

 
RenatoMartini
Frequent Advisor

Fan cooler & Integrity rx 1620

 

It's possible to control the velocity of the fans during the stand by of a rx 1620 server box? Any ideas... 

--Renato Martini (Brazil)
http://renatomartini.net
http://www.iti.gov.br
7 REPLIES 7
Highlighted
Torsten.
Acclaimed Contributor

Re: Fan cooler & Integrity rx 1620

Please clarify!

 

During standby means the server is powered off? The fans will be off too.

 

However, even if the box is running, the firmware takes control of the fans depending on temperature.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RenatoMartini
Frequent Advisor

Re: Fan cooler & Integrity rx 1620

Yes, okay, powered off, no fans, no nothing... But after a "shutdown -h", the server will be standing by, leds green and yellow blinking, and the fans on, even if a little bit more soft comparatively when I press the power button. My question is: how I  can (if I can or must...) setting up the firmware to control theses activities of the fans during the standing by stage?

--Renato Martini (Brazil)
http://renatomartini.net
http://www.iti.gov.br
Torsten.
Acclaimed Contributor

Re: Fan cooler & Integrity rx 1620

After a shutdown the system should be off.

 

Check the ACPI setting from EFI shell.

 

Maybe a command like

 

Shell> acpiconfig default

or

Shell> acpiconfig enable softpowerdown

 

helps.

 

What does

 

Shell> acpiconfig

 

show?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RenatoMartini
Frequent Advisor

Re: Fan cooler & Integrity rx 1620

 

Well,

 

Shell> acpiconfig default

´acpiconfig´ not found

Exit status code: Invalid parameter

 

... the EFI's version didn't support the command acpi.

 

(Firmware revision 2.18 and EFIEFI ver 1.10)

 

regards

--Renato Martini (Brazil)
http://renatomartini.net
http://www.iti.gov.br
Torsten.
Acclaimed Contributor

Re: Fan cooler & Integrity rx 1620

Your firmware version is likely much too old:

 

http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=441889&swItemId=ux_54921_1&swEnvOid=54#tab-history


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RenatoMartini
Frequent Advisor

Re: Fan cooler & Integrity rx 1620

Thanks!

 

I got the new firmware tarrball, after install it, I'll drop a line. 

 

 

--Renato Martini (Brazil)
http://renatomartini.net
http://www.iti.gov.br
S_Logan
HPE Pro

Re: Fan cooler & Integrity rx 1620

Hi 

 

Could you please share the status of this issue

I work for HPE

Accept or Kudo