Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

integrity rx2660 single processor

 
proconsul
Occasional Visitor

integrity rx2660 single processor

I have an integrity rx2660 that will not boot,i got a cru error system health blinking orange/power-steady orange and found the p400 controller battery was bad,i replaced the batt and now no errors but it just goes to a black screen with a flashing curser in the upper left hand corner and is not responding????any help would be greatly appreciated
2 REPLIES 2
TTr
Honored Contributor

Re: integrity rx2660 single processor

Check the status lights on page 135 of the user service guide

http://docs.hp.com/en/AB419-9002C-ed5/AB419-9002C-ed5.pdf

Does anything at all come on the screen before it goes on the blank screen? Are you sure the console is connected properly?
Torsten.
Acclaimed Contributor

Re: integrity rx2660 single processor

Do you see anything while starting?

If, go to EFI shell and run

Shell> conconfig

to check your console configuration.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!