cancel
Showing results for 
Search instead for 
Did you mean: 

processor speed

 
navin
Super Advisor

processor speed

Is clock freq and processor speed is same
Thanks ?

 

 

-------------------------------

P.S. This Thread has been moved from Servers --> General to Servers --> Integrity Servers - Forum Moderator

Learning ...
5 REPLIES 5
Robert-Jan Goossens
Honored Contributor

Re: processor speed

Hi Navin,

The CPU speed is most of the times displayed in Mhz, you can use the machinfo command to dipplay you CPU speed.

Regards,
Robert-Jan
SoorajCleris
Honored Contributor

Re: processor speed

Hi,

Please note that machinfo will not work with PA-RISC systems.

Regards,
Sooraj
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie
Torsten.
Acclaimed Contributor

Re: processor speed

Not on RISC systems?
What's this?

# machinfo -v
CPU info:
1 PA-RISC 8800 processor (800 MHz, 32 MB)
CPU version 4
2 logical processors (2 per socket)

Vendor identification: Hewlett-Packard
Processor version info: 0x0000000000000284
Processor capabilities: 0x00000000000000b2
FSTWS, FSTWX, FLDWS, FLDWX generate word tx to I/O space
Multimedia halfword shift-and-adds
Multimedia halfword adds and subtracts
Speculative data prefetch on loads of GR0
Instruction cache: 32 MB
Data cache: 32 MB

Memory: 4096 MB (4 GB)

Firmware info:
Firmware revision: 46.34
IPMI is supported on this system.
BMC firmware revision: 3.52

Platform info:
Model: "9000/800/rp3440 "
Machine ID number: abcdef12345678
Machine serial number: DE12345678

OS info:
Nodename: server2
Release: HP-UX B.11.31
Version: U (unlimited-user license)
Machine: 9000/800
ID Number: 12345678
vmunix _release_version:
_release_version:
@(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
SoorajCleris
Honored Contributor

Re: processor speed

Hi Torsten,

Thanks for the update. I gave the info as per the manpage available. I never tried the commands early , it never worked with PA RISC

# model
ia64 hp server rx2600
[rx260-17]/
# uname -a
HP-UX rx260-17 B.11.23 U ia64 3250938661 unlimited-user license
[rx260-17]/
# man machinfo

machinfo(1) machinfo(1)
Itanium(R)-Based Processor Family Only

NAME
machinfo - print machine information

SYNOPSIS
machinfo

DESCRIPTION
machinfo prints useful debugging information about the machine.

REgards,
Sooraj
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie
Torsten.
Acclaimed Contributor

Re: processor speed

No problem.

It works with PA-RISC, but with 11.31 only.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!