Creating a new Network, Vlans, MSTP, IGMP

[maca2004]

Hi

I'm looking for help setting up and creating a network.

The network is for IP CCTV and Acess Control.  It's standalone and not shared or accessed externally.

There are 5 main cabinets containing a mixture of 1920 Office Connect switches (POE for Cameras) and 1820 Office Connect Switches (non-POE for doors).  The cabinets are linked by an 8 core fibre switch.

There are two edge switches connected via CAT7 cable to the core switches - please see PDF.

Connected to the switch in the control are;

3 X NVRs

3 X Decoders

1 x Server PC for Access Control

1 x Client PC for CCTV & Access COntrol

1 x Printer

I've set up at the moment on a subnet of 255.255.248.0 and using IP addresses 192.168.0.xxx to 192.168.5.xxx.

I.E. 192.168.1.xxx for cameras, 192.168.0.xxx for switches and NVRs and 192.168.5.xxx for Access Control Units.

I'm new to networking so have little idea.

So, I need to create 2 x VLANs and configure MSTP. And also IGMP querier.

One VLAN for CCTV traffic and the second VLAN for all other traffic.

I need the client PC to be able to ping the whole network.

Can anybody help a layman?