New client has existing RDX drives and 320GB cartridges. Bought 4 new 500GB cartridges to use. Having detection issues with new cartridges on 2 different RDX drives. One time you plug them in and they detect as normal 500GB NTFS drives. Insert a diff...
Bonjour, je souhaite remplacer tous les disques (Sain) de mon serveur qui tournent en 10K par d'autres qui tournent en 15K. quelle est la procedure a suivre? merci pour votre reponse
Bonjour, je souhaite remplacer tous les disques (Sain) de mon serveur qui tournent en 10K par d'autres qui tournent en 15K. quelle est la procedure a suivre? merci pour votre reponse
Greetings! I'm looking for firmware update for HP StorageWorks Optical 30ux (AA961A). Here is the notice: SUPPORT COMMUNICATION - CUSTOMER NOTICE Document ID: c00655202 Version: 1 Notice: 30 GB UDO Drives Firmware v3.04 Release ... Product is not sup...
On the Drivers & Software for HP Smart Array P410i Controller - HPE Support Center download page, besides language, there is an option to choose OS as well. My intention is just to check firmware versions available and compare them to those curre...
If the disks are reported as EH0300FBQDD by the OS they are ok. The problem could be this: (I'm sure it is) Online firmware flashing of drives attached to an HP Smart Array controller running in Zero Memory (ZM) mode or an HP ProLiant host bus adapte...
Yes, it is competely normal. Difference between EH0300FBQDD and EH0300FCBVC would be different manufacturer or the release. However, the drive specs are the same: 300GB hot-plug dual-port SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 2.5-i...
Reseat the card and check if the issue is resolved. If the issue persists, try installing in a different slot on the system board. If the issue persists, remove the cache module and check if the issue is resolved. If the issue persists, and a spare c...
New Messages
No New Messages
Hot Topic
Replied-to Topic
Read-Only Topic
