M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

AP connected by mesh restart with no reason

 
Highlighted
Marcos Semidán
Occasional Advisor

AP connected by mesh restart with no reason

I have a small mesh network with APMSM320-R. One Master, another one Alternate Master, and the last one Slave. They are all connected to a MSM765zl controller. two or three times a day the Alternate Master and the Slave AP restart without reason aparently. Looking at the log i get the next message:

warning monitord (Serial of the AP) KEEP ALIVE failure on , restar process if running.

Mesh signal is strong between AP's (they transmit at 54Mbps).

Could someone help me?

Need more information?

Thanks in advance
2 REPLIES 2
Highlighted
Fred!
Trusted Contributor

Re: AP connected by mesh restart with no reason

Most likely this is a bug, which was most likely fixed in a later/maintenance SW release. What version do you have? You should contact HP support immediately to get the latest maintenance release on your current major SW version.
Highlighted
Marcos Semidán
Occasional Advisor

Re: AP connected by mesh restart with no reason

Right now i have the latest version. (5.4.1). Reading release notes i didn't found anything about my problem in the section "Known issues".

I'm thinking about expand the network, so i hope this problem will be fixed in posterior release.

Thank you.