HPE Community
M and MSM Series
1757397 Members
3442 Online
108860 Solutions
New Discussion

GMS with two controllers

 
Andreas Papamihael
Occasional Contributor

‎01-28-2016 03:51 AM - edited ‎01-29-2016 09:57 AM

‎01-28-2016 03:51 AM - edited ‎01-29-2016 09:57 AM

GMS with two controllers

I have a situation where i am running the Guest Management System with one MSM765zl controller for the last few years. Now i am adding a new MSM720 controller in the deployment. I want to be able to use the same GMS database to update both controllers with the same guest accounts. Is this even possible?

0 Kudos
1 REPLY 1
Richard Litchfield
Respected Contributor

‎02-20-2016 03:11 PM

‎02-20-2016 03:11 PM

Re: GMS with two controllers

No.

It may make sense for one of the controllers to just do guest (not manage any APs). You egress to a VLAN, and have guest access ingress to the guest controller via VLAN rather than SSID. Check the max concurrent users supported (think it is 250 for the MSM720 and 2000 for the MSM765/775.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.