MSM 760 and Local mesh

[Georgeisaac]

I am facing some issues in integration of msm760 and accesspoints (310)

Customer requirement-Create local mesh between access points with encryption

Software version 5.5.3

Incompatible settings-It says its because I am using same mesh id which used to connect with msm controller.It ask me to change mesh id or disable it.When I disable it sometimes it will synchronize but after some time it will get reseted and start to restarting.

2.Some access points are synchronizing but after some hours I will lose connection and power and mesh LED will start to blink.

3. When one AP got synchronized I tried to move it to another group with alternate master settings But it started to get restarted 

Radio mode -802.11g

channel selection-Automatic

I am attaching logs,config and screen shoots of configuration

Please help me..

[Georgeisaac · Accepted solution]

Hi,

       Issues sorted out

The problem because i have configured both on master and slave.

I have to configure local mesh in master access points only

[Erik Behrendt]

Could you please post screens of your master and slave mesh group settings please?

I seem to have the same misconfiguration issues.

Kind regards

Erik