MSM710 - MSM310 - WAN - Multi Site AP Management

[KCollinson]

Good day,

Scenario:
2x geographic sites (One Controller)

Site 1:
MSM710 Mobility Controller
ProCurve 5400 series Switch
MSM 320 AP
VID 1: 192.168.1.x - Controller and AP management interface VLAN
VID 2: 192.168.2.x - Private VLAN
VID 3: 192.168.3.x - Guest VLAN

AP’s Egress SSID to VID no problem.
Not using the WAN port on the controller, controller is purely for AP config management

Site 2:
ProCurve 5400 series Switch
MSM 320 AP
VID 1: 192.168.11.x - AP management interface VLAN
VID 2: 192.168.12.x - Private VLAN
VID 3: 192.168.13.x - Guest VLAN

Question:
How to I get the controller @ site 1 to communicate with AP’s @ site 2 to enable remote management (The WAN can communicate to all VLANs)?

Many thanks,
Karl.

[Fredrik Lönnman]

If you have routed access between 192.168.1.x and 192.168.11.x you're home free. You'll only have to make the APs in 192.168.11.x able to find your controller, this can be made either through staging, dhcp option 43 or DNS (cnsrv1.localdomain)