M and MSM Series
cancel
Showing results for 
Search instead for 
Did you mean: 

controller teaming with vlan-range configuration

 
Highlighted
Frequent Advisor

controller teaming with vlan-range configuration

hello

  

   I have configured teaming with two MSM760.  have two VSC's one of which  have vlan-range option enabled and second VSC is with one vlan. 

  with single vlan VSC i didn't have any problem, but i have connectivity problem with second VSC(with vlan-range). clients are getting ip addresses, but they couldn't reach even their gateways. also at this time team ip and primary wlc is not accessible.

 

  I have also opened support case, HP engineer told  me that teaming and vlan range usage together is not supported. 

 

 Our task is to have redundancy - teaming  and no huge broadcast domains, because i use several vlans.

   

     If someone has the same task, please give me any HP supported solution....

 


3 REPLIES 3
Highlighted
Frequent Advisor

Re: controller teaming with vlan-range configuration

Hello again, 

 

 

did anybody here used teaming , one sssid and vlan range-ranges together? 

 

i dont believe that if i will team 5 controllers i have to use only one huge subnet for users...   HP guys help :)

Occasional Advisor

Re: controller teaming with vlan-range configuration

From what I understand you have to set a users 'home network/vlan' by passing the correct RADIUS attribute for the desired VLAN.
Highlighted
Frequent Advisor

Re: controller teaming with vlan-range configuration

hello dverl,

 

i'm not using radius server for vlan assignment,  just created network profiles with vlan ranges. 

 

i am interested if anyone uses such configuration, or how well does it works?

 

thanks