MSA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HSG80 8.8F and SecurePath 4.0C SP2-1 on w2k3, Compaq Secure Path Disk driver issue

 
Brian Adaniya
Occasional Visitor

HSG80 8.8F and SecurePath 4.0C SP2-1 on w2k3, Compaq Secure Path Disk driver issue

After I install SecurePath the secure path disk drivers (Compaq Secure Path Disk) for the HSG80 LUNs on windows comes up as exclaimation marks. The "Compaq Secure Path Disk Bus" and "Compaq HSG80CCL" drivers are fine. Since the secure path disk drivers are installed but not loaded, I cannot see any LUNs from the OS. The HBA I am using is QLogic 2342 and I have tried both storport and miniport drivers, but encountered the same problem. Without secure path installed, the LUNs are accessible from the OS, but of course no multipathing support.