RedHat EL3 FC2214 Secure Path hangs

[CA972096]

Running RHEL 3.0 AS with FC2214 HBA connecting to EVA with kernel 2.4.21-9.ELsmp. After installing Secure Path 3.0c if you run probe_luns -a, the server hangs until power reset with following message:
./probe_luns -a
Removing /proc/scsi/qla2300/1, target 2, LUN 32
Scanning /proc/scsi/qla2300/1, target 0, LUN 0Starting timer : 0 0
blk: queue c4816818, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
We have tried the 2.4.21-4.ELsmp kernel with same results. Seems to work fine until Secure Path is installed. Data access on san is ok but Dataprotect backup provokes same error and hang. Any suggestions?

[Israel Cárdenas]

I've exactly the same problem. Please, notify me if you got a solution.

[Uwe Zessin]

I am quite sure that this is a known limitation that is documented somewhere, but I don't have any pointer handy right now, sorry.

[Israel Cárdenas]

SecurePath is supported under RedHat AS. I don't think it doesn't work caused by a limitation. In my particular case, I've a DL380 G4 with RedHat AS version 3, and with 2 FC2214 HBA. Without SecurePath data access on SAN (MSA1000) is OK, but if I use SecurePath the system hangs, without any messages on logs...