LH 3000 fan speed

[simunek]

1)
After boot the fan speed is still very high.

On my other servers (Compaq) fan speed is ajusted after boot by the server agents.
Is there such a feauture in LH3000 server line.
..Or if the initial fan speed is set high can i tune it...?

2)
I dont see the fan speed in the toptools is it because of me not having the value TT or its just not supported...

thanx guys

[paul courry]

Fan speed is temperature based. If you have the fan plugged into the motherboard then the Mb will control the fan speed based on temp.

[simunek]

Thanx Paul....well I knew that...
but that didnt answer either of my questions...

[Marino Meloni_1]

hi
this option is not emplemented , you cannot control fan speed on lh3000 series.
bye
marino

[Marcin Golembski_1]

Turn the server off and unplug the power cord for a minute or two...

[Marino Meloni_1]

hi
the speed of the fan can increase automaticaly if one of the fan of the group fail
bye
marino