VMS TCPIP NFS Client will not map to other VMS NFS Server

[Layne Burleson_1]

I have 2 alphas running tcpip 5.3 eco 4. One of them is the NFS server and the other the client. On the client I'm trying to map 2 different directories that are on the server. This is what I get:

On server:
RMCA» tcpip show export

File System Host name

/csd_disk/kits *
/csd_disk/localuser *
/csd_disk/nodeperm/cts/cts_rpts *
/csd_disk/nodetemp/rpt/abc *
/csd_disk/nodetemp/rpt/cdl *
/csd_disk/nodetemp/tpfdms/tpauto *
/csd_disk/nodetemp/tpfdms/tpxmit *
/vms_disk/kits *

On Client:

$ sho dev dnfs

Device Device Error Volume Free Trans Mnt
Name Status Count Label Blocks Count Cnt
DNFS0: (RMCB) Online 0
$ tcpip mount dnfs1: nw_dkb0 /host=rmca/path="/csd_disk/kits" /noadf
%TCPIP$DNFSMOUNT-S-MOUNTED, /csd_disk/kits mounted on _DNFS1:[000000]
$ tcpip mount dnfs2: nw_dkb1 /host=rmca/path="/vms_disk/kits" /noadf
%TCPIP$DNFSMOUNT-E-MOUNTFAIL, error mounting _DNFS2:[000000]
-SYSTEM-W-NOSUCHFILE, no such file
$

Any ideas why the 2nd mount fails? Both csd_disk:[kits] and vms_disk:[kits] exist on the server and are exports.

[Volker Halle]

Layne,

NFS typically sends messages to OPCOM; if there is a problem. Please check OPERATOR.LOG on the NFS server or use $ REPLY/ENABLE

Is /vms_disk on another disk ? What does TCPIP> SHOW MAP report ?

Volker.

[Daniel Fernandez Illan · Accepted solution]

Layne

Are you maped /vms_disk ?
tcpip>map "/vms_disk" logical_name

Saludos.
Daniel.

[Layne Burleson_1]

Sometimes the solution is right in front of you. I didn't have it mapped. Thanks, Daniel.