decnet - incorrect executor node number

[TMcB]

Hi everyone
After a reboot, my Decnet Phase 5 is no longer working.
i can "set host 0" but nothing else.

I think the executor node number is wrong on ncp, but how do I change this?

Thanks terry

(SCSSYSTEMID 1063)

> show net
Product: DECNET Node: ISTBA3 Address(es): 1.39

> mc ncp show node
Node ID (node-name, address): istba3
Node Volatile Summary as of 9-APR-2010 08:25:17
Executor node = 1.4 (ISTBA3)
State = on
Identification = DECnet-OSI for OpenVMS


decnet_register shows CORRECT:
Directory Service: Local name file

Node name: LOCAL:.ISTBA3
Phase IV synonym: ISTBA3
Node address: 49::00-01:AA-00-04-00-27-04:20 (1.39)
Node address: 49::00-01:AA-00-04-00-27-04:21 (1.39)

[Oswald Knoppers_1]

What do you mean with 'nothing else'?
What is the error message you get.

Can you show the output of:

$ mc ncl show all

and

$ mc ncl show rout cir * all stat

Oswald

[TMcB]

thanks for getting back to me.
I meant that I cannot set host to any other nodes, either using name or address.

ISTBA3 A0459235> mc ncl show all

Node 0
at 2010-04-09-10:17:11.750+01:00Iinf

Identifiers

Name = LOCAL:.ISTBA3
Address =
{
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_OSInetwork , 49::00-01:AA-00-04-00-04-04:21 (LOCAL:.ISMBA1) ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV2 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_IP , 0.0.0.0 ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_NSP ] ,
[ DNA_OSInetwork , 49::00-01:AA-00-04-00-04-04:20 (LOCAL:.ISMBA1) ]
)
}

Status

UID = 14654000-5B88-11D9-8001-AA0004000404
State = On
Functions Enabled =
{
Address Watcher ,
CMIP Listener
}
ID = 00-02-A5-20-58-B7

Characteristics

Version = T5.0.3
Implementation =
{
[
Name = OpenVMS Alpha ,
Version = "V8.3 "
] ,
[
Name = HP DECnet-Plus for OpenVMS ,
Version = "V8.3 23-JUN-2006 18:53:09.50"
]
}
Script Location =
Maximum Listeners = 0
Listener Template =
Secondary Names =
{
}

Counters

Creation Time = 2005-12-29-19:04:20.191+00:00Iinf
Renames = 8
Changes of ID = 59
IDROM Check Failures = 0
Changes of Address = 0

ISTBA3 A0459235> mc ncl show rout cir * all stat

Node 0 Routing Circuit EIA-0
at 2010-04-09-10:17:16.810+01:00Iinf

Status

UID = A62AB1FF-4313-11DF-8243-AA0004002704
State = On
Data Link SDU Size = 1492
Data Link Port = CSMA-CD Port CSMACD$EIA_0004


Node 0 Routing Circuit FPA-0
at 2010-04-09-10:17:16.810+01:00Iinf

Status

UID = A72635F7-4313-11DF-8243-AA0004002704
State = Off
Data Link SDU Size = 0
Data Link Port =


Node 0 Routing Circuit EWA-0
at 2010-04-09-10:17:16.811+01:00Iinf

Status

UID = A726A866-4313-11DF-8243-AA0004002704
State = On
Data Link SDU Size = 1492
Data Link Port = CSMA-CD Port CSMACD$EWA_0004

[TMcB]

the DNA_OSInetwork from above command has picked up the name of another server.

I need to get rid of this incorrect executor node number and incorrect DNA_OSInetwork value.

How do I do this?

Thanks

[Oswald Knoppers_1]

You can run sys$manager:net$configure.com to reconfigure DECnet on your host.

Oswald

[Volker Halle]

TMcB,

what does $ SEARCH SYS$MANAGER:NET$ROUTING_STARTUP.NCL PHASEIV report ?

Volker.

[TMcB]

hi there ran net-configure and rebooted server. now showing correct address but still unable to set host to or from this server? Any other ideas.

> SEARCH SYS$MANAGER:NET$ROUTING_STARTUP.NCL PHASEIV
SET NODE 0 ROUTING PHASEIV ADDRESS = 1.39
SET NODE 0 ROUTING PHASEIV PREFIX = 49::
SET NODE 0 ROUTING CIRCUIT EIA-0 ENABLE PHASEIV ADDRESS = TRUE
SET NODE 0 ROUTING CIRCUIT FPA-0 ENABLE PHASEIV ADDRESS = FALSE
SET NODE 0 ROUTING CIRCUIT EWA-0 ENABLE PHASEIV ADDRESS = FALSE

> mc ncp show known node
Known Node Volatile Summary as of 9-APR-2010 10:38:57
Executor node = 1.39 (ISTBA3)
State = on
Identification = DECnet-OSI for OpenVMS

[Oswald Knoppers_1]

What is the exact error message you get?

Oswald

[Volker Halle]

TMcB,

which of the 3 LAN interfaces is really connected to your LAN supporting DECnet Phase IV protcols (EIA, FPA or EWA) ?

Volker.

[Oswald Knoppers_1]

SET NODE 0 ROUTING CIRCUIT EIA-0 ENABLE PHASEIV ADDRESS = TRUE
SET NODE 0 ROUTING CIRCUIT FPA-0 ENABLE PHASEIV ADDRESS = FALSE
SET NODE 0 ROUTING CIRCUIT EWA-0 ENABLE PHASEIV ADDRESS = FALSE

It seems you have three devices confugured as routing circuits for DECnet. When running net$configure in basic mode it will configure all circuits it can find. Maybe you do not want all of them. You need to run net$configure with parameter 'advanced' and then choose option 3 (configure devices) and answer "none" for the data link name on the devices you don't want to use.

Oswald