VLAN between two switches

[Hjoelsen]

I have two Procurve 2626 in two different buildings.

Building 1 (Switch 1)

I would like to use port 1-10 to default vlan

I would like to use port 11 - 20 to 3G_VLAN

I have defined 3G_VLAN with vlan id 3.

On port 24, I have a 3G modem, which i have attached.

On port 26, I have connected those two switch (building 1 and building2) with a fiber cable.

Building 2 (Switch 2)

I would like to use port 1-10 to default vlan. I would like to be able to talk with the devices in Building 1 from port 1-10.

I would like to use port 11 - 20 to 3G_VLAN, so these devices can use 3G modem, which is in building 1 at port 24.

I have defined 3G_VLAN with vlan id3.

On port 26, I have connected fiber cable, which is connected to switch from building 1.

Building 1:

How do I define port 11-20? (Tagged/Untagged)

How do I define port 24? (Tagged/untagged)

How do I define port 26? (trk1, trk2, etc.)

Building 2:

How do I define port 11-20? (tagged / Utagged)

How do I define port 26? (trk1, trk2 etc.)

[johnk3r]

Port 11-20 -> Untagged
Port 24 -> Untagged
Port 26 -> Untagged 1 and Tagged 3 (Port Trunk)

The above configuration is based on the switch's IP is in VLAN 1.