ProLiant Deployment and Provisioning

Can`t set boot device by ipmitool on ProLiant DL380 G7

 
fxpester
New Member

Can`t set boot device by ipmitool on ProLiant DL380 G7

 ipmitool -I lanplus -H 10.79.192.69 -L ADMINISTRATOR -U ironic -R 12 -N 5 -P ***** chassis bootdev disk options=persistent
Set Boot Device to disk

 ipmitool -I lanplus -H 10.79.192.69 -L ADMINISTRATOR -U ironic -R 12 -N 5 -P **** chassis bootparam get 5
Boot parameter version: 1
Boot parameter 5 is valid/unlocked
Boot parameter data: 0008000000
 Boot Flags :
   - Boot Flag Invalid
   - Options apply to only next boot
   - BIOS PC Compatible (legacy) boot
   - Boot Device Selector : Force Boot from default Hard-Drive
   - Console Redirection control : System Default
   - BIOS verbosity : Console redirection occurs per BIOS configuration setting (default)
   - BIOS Mux Control Override : BIOS uses recommended setting of the mux at the end of POST

But node still tries to boot from NIC, it get adress from DHCP and fails to boot.

1 REPLY 1
Dennis Handly
Acclaimed Contributor

Re: Can`t set boot device by ipmitool on ProLiant DL380 G7

You also may want to ask in the Proliant board:

https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264