ProLiant Servers (ML,DL,SL)
1748180 Members
4117 Online
108759 Solutions
New Discussion юеВ

Re: 207-Invalid Memory Configuration - System Halted!

 
Sergey14
Occasional Visitor

207-Invalid Memory Configuration - System Halted!

╨Ъ╤Г╨┐╨╕╨╗╨╕ ╨┐╨░╨╝╤П╤В╤М HP 8Gb 2Rx4 PC3-10600R-9 kit(500662-B21) ╨┤╨╗╤П ╤Б╨╡╤А╨▓╨╡╤А╨░ HP DL320 G6.  ╨г╤Б╤В╨░╨╜╨╛╨▓╨╕╨╗╨╕ ╨╜╨░ ╤Б╨╗╨╛╤В╤Л 3A ╨╕ 6B, ╨║╨░╨║ ╨╛╨┐╨╕╤Б╨░╨╜╨╛ ╨▓ ╨║╨╛╨╜╤Д╨╕╨│╤Г╤А╨░╤В╨╛╤А╨╡ ╤Г ╨▓╨░╤Б ╨╜╨░ ╤Б╨░╨╣╤В╨╡. ╨Я╨╕╤И╨╡╤В "207-Invalid Memory Configuration - System Halted!"

╨з╤В╨╛ ╨┤╨╡╨╗╨░╤В╤М? ╨Я╨╛╤Б╤В╨░╨▓╨╕╨╗╨╕ Proliant System BIOS - W07(07/02/2013). ╨в╨╛╨╗╨║╤Г ╨╜╨╡╤В╤Г. ╨Т ╨▒╨╕╨╛╤Б╨╡ ╤Г╤Б╤В╨░╨╜╨╛╨▓╨╕╨╗╨╕ ╨╝╨░╨║╤Б╨╕╨╝╨░╨╗╤М╨╜╤Г╤О ╤З╨░╤Б╤В╨╛╤В╤Г 1333Mhz ╨┤╨╗╤П ╨┐╨░╨╝╤П╤В╨╕.

2 REPLIES 2
cykVM
Frequent Advisor

Re: 207-Invalid Memory Configuration - System Halted!

Hi Sergey,

 

I think you will get more help if you write in English. I made a Google translation (it detected Serbian ...):

 


Sergey14 wrote (Google translation from Serbian):
Purchased the HP 8Gb memory 2Rx4 PC3-10600R-9 kit (500662-B21) for HP DL320 G6 server. Found at Slots 3A and 6B, as described in the configurator to you on site. You write "207-Invalid Memory Configuration - System Halted!"

What do? Set ProLiant System BIOS - W07 (07/02/2013). So the net. Bios determine maximum frequency of 1333MHz for memory.


Question: The POST (screenshot) shows "24GB" installed, so there seems to be previously installed memory in addition to the 2 (or 3 of them?) newly bought RAM modules.

Did you probably mix UDIMMs (non REGISTERED RAM) and those RDIMMs ( REGISTERD, PC3-10600R) you bought?

That would not work, either only UDIMMs (max. 24GB) or only RDIMMs (max 144GB), see Quickspecs for that server: http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04286377

 

Hope that helps

 

cykVM

 

cykVM
Frequent Advisor

Re: 207-Invalid Memory Configuration - System Halted!

Did you answer with a tag? Tag to my reply says "foto is 3 memory 8GB = 24GB" and I did not set this tag. Should that be your answer?

Sorry, but have I been right and you mixed different types of modules (registered and non-registered)?

PLease post a reply instead of a tag and the exact memory configuration of the server.

You may need to pull out the modules to see what type they are.