ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BL25p Health Light Amber??

 
eric-tow
Occasional Contributor

BL25p Health Light Amber??

Hi,
I recently noticed that on one of my blades that there was an Amber light. So I looked it up on HP site and it is the Health light, and it means degrading condition. Does anyone know what I might do to fix this issue? Would I have to call HP?

Thanks.
3 REPLIES
Mark Matthews
Respected Contributor

Re: BL25p Health Light Amber??

Hi,

Try looking at the System Management Homepage on the blade.
Should be on the Start Menu if Windows, or navigate to https://127.0.0.1:2381

Also the HP IML should tell you what is wrong (if Windows, then it'll be in HP System Tools on the Start Menu)

---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
eric-tow
Occasional Contributor

Re: BL25p Health Light Amber??

Thank you for your reply.

This actually has VMware ESX 3.0.2 on it. So I am not sure if there is something different I would have to do for that?

Thanks.
Simon Curtiss
Occasional Visitor

Re: BL25p Health Light Amber??

There are HP Tools that can be put on ESX servers. I believe the latest version is of the Management Agents is 7.91 which can be found here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3191210&prodNameId=3288168&swEnvOID=2077&swLang=8&mode=2&taskId=135&swItem=MTX-3ce69a09e0f54ee6b5a95a279f

I would also check your NIC connections are both (assuming you are using both) working. Also that both Redundant Power supplies are OK and after that start investigating the Raid Array - the Agents mentioned above will make all of this easier.