DL380 G4 Rack Mounting

[stevendt]

Hi,

I have a couple of DL380 G4s that I need to mount in a Dell square hole rack. I am trying to source rack mount kits and am not sure of which kit that I need. Can someone help please?

I have seen the 360322-503 kit, but also seen a remark that it is for round hole racks?

Can anyone advise which kit I need please? As the servers are quite old, there seems to be a lack of rack mounting informatino on the HP Support site - at least, in the places that I am looking,
regards
Dave

[gregersenj]

The standard kit for the server will fit the holes in the Dell RACK.

BR
/jag

[gregersenj · Accepted solution]

The Spare part no for the original Rail kit is 359254-001

Do check that the Dell RACK is deep enough.
The square holes is the same as the HP RACK.

BR
/jag

[Neil Ashworth_3]

Agree that original Rail kit is 359254-001. Do not know if it is still availble from HP but there are many sources available for second user rack mount kits around. If you need any more help sourcing these contact me either here or neil@hpssltd.co.uk

[stevendt]

Hi,

thanks for the responses and the confirmation of the correct part number. Still not sure what the 360322-503 kit is, but am happy that the other is the one that I need,

regards
Dave

[Andrew Gladstone]

Steven-
The 360322-503 will work in a square hole rack. No need to go get anything else.
Good Luck.