ProLiant Servers (ML,DL,SL)

DL380p Gen8 System Power Fault Detected. System Has Enabled Power Protection and Disabled

 
SOLVED
Go to solution
Wit78yatha
Visitor

DL380p Gen8 System Power Fault Detected. System Has Enabled Power Protection and Disabled

Hi, 

Please help me with this issue. The server Shutdown and when I power it on and check the server, there is No Faulty hardware. Kindly help me. What is the root cause of this Issue.

 (XR: 14 00 MID: FF OD FE CE CO FF FF 32 32 0C 0C 00 9C 04 00 01 03 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00)

Thanks,

3 REPLIES 3
Ihaqueit
Trusted Contributor

Re: DL380p Gen8 System Power Fault Detected. System Has Enabled Power Protection and Disab

Update firmware (ILO, BIOS, etc) 

I Haq
SanjeevGoyal
HPE Pro
Solution

Re: DL380p Gen8 System Power Fault Detected. System Has Enabled Power Protection and Disab

Hello,
 
Please follow the below recommendations to fix this issue.

1.  Cleared the NVRAM.
2. Update the server with the latest bios and all firmware.
3. Replace the riser#1

 If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,


I am a HPE Employee

Accept or Kudo

Wit78yatha
Visitor

Re: DL380p Gen8 System Power Fault Detected. System Has Enabled Power Protection and Disab

Replace the riser#1 is work!!!

Thank you.