Disappointed with new DL380 G6 fan noise

[Band]

Hello. As in previous article about an ML 350, is seems that G6 series have a noise problem, when cards are added to the riser. Fans always work at 70% making the server extremely noisy.
HP does not accept this as a problem. They claim that 70% utilization of the fan and 60 degrees celcius at I/O board zone is normal and within the specifications of the machine. So they don't intend to do anything about it.

Regards, George

[Michal Kapalka (mikap)]

hi,

i can undrestand, that the noise is a problem (if your desk is in the same room), but also, we have lot of this servers, and the noise is for me not a problem, because they are paced in the datacenter.

HP think that ale servers will be paced some in datacenter, in your case it will be better to run some HW check if someting is wrong.

mikap

[Band]

Hello. Well, not all servers are for data centers. there are also mid-sized companies!!
i run hw tests, bios and firmware updates with HP guidance, but nothing. they say it's normal

[Michal Kapalka (mikap)]

hi,

Hello. Well, not all servers are for data centers. there are also mid-sized companies!!

- yes, i know, please don't be angry on me.

i run hw tests, bios and firmware updates with HP guidance, but nothing. they say it's normal.

- hmm, that strange, look on this thread from ITRC.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1330426

mikap

[Band]

I am not angry on you, don't worry. :-) I appreciate your replies
I read the article. it's quiet as far you don't install cards on the riser, or don't upgrade ilo2 to firmware version 1.75 and above. that's where the problems appears

Read the following, it's exactly the same case, other model. G6 series. HP considers this article irrelevant because it's another model. what can I say?

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1258460380462+28353475&threadId=1338715

[Michal Kapalka (mikap)]

after reading your post, and the weblink,

it seems to that, you need to waint until HP make/releasse a new firmware.

i can really understand that you are disappointed from this situation, we hade 1 year ago problem with the ELS712 big tape library, and we fixed it after 6 months of
firmware upgrade and replacement of some components, at the and HP solved the problem, with our satisfaction.

mikap

[Band]

I don't see how they will fix it, when they don't accept it as a problem, but as normal, "within specifications" behavior.
Anyway, i don't intend to wait. i will get rid of the server and replace itwith an IBM. And of course never again HP.

[Michal Kapalka (mikap)]

hi,

ok good luck, the IBM x3650-M2, is very well.

hope if you change the branch you will be more satisfied.

mikap

[Band]

thanks. i already work with IBM for 10 years, and i am fully satisfied. My mistake to change brand. anyway.
regards

[Diego Castelli]

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=3884319&prodTypeId=15351&prodSeriesId=3884319&objectID=c02017655

You probably have to upgrade ILO2 Firmware to 1.81 or later.
Bye