HP DL380 G4 CPQHLTH-MIB

[CraigJWallace]

Hi Guys.

I really hope someone can help me. I have been monitoring my servers with SNMP and on the CPQHLTH-MIB i am getting a 4 which is a fail.

If i run snmpwalk -v1 -c public IP ADDRESS HERE .1.3.6.1.4.1.232.6.1.3.0

Then i get SNMPv2-SMI::enterprises.232.6.1.3.0 = INTEGER: 4

Now INTEGER: 4 in the Global Status is a fail.

But what has failed? , how can i find out? I have had a look in the HP Insight Diagnostics but cant see anything that has failed. I have even updated the server with the latest support pack.

Can anyone help me work this out

Thanks in adavnce

[KarloChacon]

hi

are those windows systems?
if so

have you checked event viewer?

also check Integrated management log for both linux/windows?


just in case this might be helpful
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00760188/c00760188.pdf

regards

[Sangram_1]

This is related to the Management Agents installed on the server.

Upgrade the latest Proliant Support Pack and that should take care of the issue. As it will install / reinstall the latest management agents.